# Scheduler
A test scheduler for the NJTH which compiles a schedule according to the rules and priority of the tests. 

## Inputs
- Target test directory, test results directories 
- Estimated runtime for each type of test for calculations
- Top priority tests
  - Allow user to manually override and enter tests that needs to be run tonight
- Day time testing (Y/N) 
  - if yes, enter how many hours

| TestID | Type | ROT | COE_Pairs | RX_TX | Priority | Scheduled_on | Completed |
| ------ | ---- | --- | --------- | ----- |--------- | ------------ | --------- |
| P2PRXAX001 | P2P | ROT1 |  | RX | 3 | | 0 |
| P2PRXAX004 | P2P | ROT1 | [COERXAX001, COERXAX002]  | AX | 2 | | 0 |
| P2PTXAX001 | P2P | ROT1 | | TX | 3 |  | 0 | 
| COERXAX001 | COE | ROT1 | | RX | 3 |  | 0 |
| COERXAX002 | COE | ROT1 | | RX | 3 |  | 0 |
| P2PRXAX014 | P2P | ROT2 | | RX | 3 |  | 0 |
| P2PTXAX014 | P2P | ROT2 | | TX | 3 |  | 0 |

## Output
### Backend
- Compile a schedule that would require the lowest amount of time in total according to the following rules and priority:
  - **Rules**
      - Two tests' overlapping stations are located at the same test points, they can be run in the same night
        - i.e. when two tests have the same rotation
        - P2PRXAX001, P2PRXAX004, P2PTXAX001, COERXAX001, COERXAX002 can be run on the same night; 
        - P2PRXAX014, P2PTXAX014 can be run on the same night
    - Up link down link p2p should run b2b (RX and TX)
      - Ex. P2PRXAX001 and P2PTXAX001 should run b2b
    - COE P2P bundle should run b2b
      - Ex. P2PRXAX001 and COERXAX001 and COERXAX002 should run b2b
  - **Priority**
    - 1: highest priority (run tonight)
    - 5: lowest priority
    - General priority: COE P2P pair -> P2P only -> P3P
      - Set priority of each test according to the type when first read in the tests P2P with COE pairing -> 2, P2P only -> 3, and P3P -> 4 
    - Change priority to 1 for manually entered top priority tests, meaning it will be run tonight
  - **Calculation**
    - Use the estimate run time for each type of test to fit as many tests as possible in a shift of testing. One shift at night on weekdays is 16hrs, on weekends 24 hours with 1hr margin
    - Estimate run time
      - P2P: 85 mins
      - COE: 115 mins
      - P3P: 105 mins
    - If day time testing for today is yes, 
  - **Failed test management**
    - After there's a modification to the result directories (results are in), and there are tests that are scheduled for last night but were not added to the result directories, meaning the test failed/invalid
    - Estimate how much time for rerun:
      - If user choose to rerun for next day, move the whole schedule down by a day

### Frontend

- **Calendar**
  
    |   | Sun | Mon | Tue | Wed | Thu | Fri | Sat |
    | - | --- | --- | --- | --- | --- | --- | --- |
    | S1 | TestId | TestId | TestId | TestId | TestId | TestId | TestId |
    | S2 | TestId | TestId | TestId | TestId | TestId | TestId | TestId |
    | S3 | TestId | TestId | TestId | TestId | TestId | TestId | TestId |

  - List the order that the tests should be conducted after compiling
  - Split one day into 3 eight-hour shift
    - Shift 1 is daytime, on weekdays don't include unless day time testing for today is on. On weekends it is included
    - Shift 2 and 3 are night time
  - Hover over each tests to see test details: type, rotation
  - Display one week at a time, arrows to go to prev/next week
  - Today will be hightlighted or boxed
  - Colors:
    - Pending tests: gray
    - Completed tests: green
    - Failed tests: red
    - Invalid tests: yellow
- **Options** (on the right of the calendar)
    - Day time testing for today: Yes or No
        - If yes, include shift 1 in todays testing
    - Top priority tests
        - Enter a list of comma separated TestIDs to make those test priority 1
- **Test Config for tonight**
  - After the schedule is compiled, show where each station should be placed at what test point
- **Estimated Completion Date**
- **Settings**
  - Estimated run time for each type of test
  - Test exclusion
      - User can enter rules to exclude tests that will not be run
  - Manual priority override
  - Holidays
    - User can enter holidays and that day will be counted as a weekend (24hrs)
- **Failed Tests**
  - Display a  banner with:
    - A message saying what tests failed last night and requires a rerun
    - Estimate rerun time
    - Yes/No button for rerun during the day
      - If yes, display today's shift 1 with the rerun tests
      - If no, the rerun tests will be ran tonight, the whole schedule is shift down by one day, update the calendar

#### Layout
```
┌──────────────────────────────────────────────────────────────┐
| CGW453 Scheduler
|   ┌────────────────────────────────────┐  COMPLETION DATE
|   |                                    |
|   |              CALENDAR              |
|   |                                    |
|   |                                    |
|
|
|
|
|
└──────────────────────────────────────────────────────────────┘
```

## Implementation
### Backend
- Python, FastAPI, SQLite for storage
- graph.py
  - graph
    - Node: test
    - Edge: compatible
    - Adjacency list
    - **Graph will not be modified**
  - active_tests (set)
    - Keep track of tests that are not completed
    - Remove test from active_tests when test completed or is excluded
  - priorities (dict)
    - Keep track of test's priority
- Methods
  - build_graph()

  - compatible(test1, test2) -> bool
    - all overlapping stations are at the same test point
  - Degree(t): ``len(graph[t] & active_tests)``
  - Base node selection: priority -> degree
  
    ``
        base = min(
        active_tests, key=lambda t: (priority[t], -len(graph[t] & active_tests)))
    ``

### Frontend
- React